7" Touch Screen PA-Controller
The DSP-7 controller has many images, mainly for the selection menu, some buttons and others. These images are stored in the flash memory. The user can update this with their own images by writing compressed images to an SD card. This SD card is inserted into the SD slot of the display. During boot-up, the images are written from the SD card to the flash memory.
The creation of images is done in five steps:
Step 1:
Draw images with these names and this resolution (x / y):
| Filename (case sensitive): | Resolution (x, y): | Description: |
| a1 | 310 x 120 | Antenna/Band menu, antenna-1 |
| a2 | 310 x 120 | Antenna/Band menu, antenna-2 |
| a3 | 310 x 120 | Antenna/Band menu, antenna-3 |
| a1m | 400 x 200 | Manual antenna selection - 1 |
| a2m | 400 x 200 | Manual antenna selection - 2 |
| a3m | 400 x 200 | Manual antenna selection - 3 |
| adcvals | 96 x 96 | menu icon: ADCVALS |
| antsw | 96 x 96 | menu icon: ANTENNA |
| arrdnpr | 64 x 64 | Arrow down pressed, for value entry |
| arrowdn | 64 x 64 | Arrow down not pressed, for value entry |
| arrowup | 64 x 64 | Arrow up not pressed, for value entry |
| arruppr | 64 x 64 | Arrow up pressed, for value entry |
| attentio | 48 x 48 | Warning symbol |
| bridge | 96 x 96 | menu icon: BRIDGE |
| bt_aus | 200 x 60 | Emergency OFF button: normal (German) |
| bt_ein | 200 x 60 | Emergency OFF button: off (German) |
| bt_off | 200 x 60 | Emergency OFF button: normal |
| bt_on | 200 x 60 | Emergency OFF button: off |
| bt_act_d | 96 x 96 | Mode button: Active (German) |
| bt_act_e | 198 x 43 | Mode button: Active |
| bt_ant_d | 198 x 43 | Manual antenna selection (German) |
| bt_ant_e | 198 x 43 | Manual antenna selection |
| bt_menu | 198 x 43 | Button to enter menu screen |
| bt_rtn | 198 x 43 | OK Buttun |
| bt_stb_r | 198 x 43 | Mode button: Standby (RX mode) |
| bt_stb_T | 198 x 43 | Mode button: Standby (TX mode) |
| calib | 96 x 96 | menu icon: CALIB |
| gn48x48 | 48 x 48 | green button |
| greenbut | 32 x 32 | green (+) button |
| history | 96 x 96 | menu icon: HISTORY |
| limits | 96 x 96 | menu icon: LIMITS |
| overview | 96 x 96 | menu icon: OVERVIEW |
| pmeter | 400 x 200 | photo realistic Power/SWR meter |
| powerbar | 96 x 96 | menu icon: POWERBAR |
| rd48x48 | 48 x 48 | red button |
| redbut | 32 x 32 | red (-) button |
| results | 96 x 96 | menu icon: RESULTS |
| splash | 200 x 111 | graphic in power-op screen |
| status | 96 x 96 | menu icon: STATUS |
| switch | 96 x 96 | menu icon: SWITCH |
| swrmeter | 96 x 96 | menu icon: SWRMETER |
| system | 96 x 96 | menu icon: SYSTEM |
| touchcal | 96 x 96 | menu icon: TOUCHCAL |
Step -2
Save the image as a bitmap in 5-6-5 format. Many graphics programs (i.e. GIMP) can export 5-6-5
bitmaps.
The file extension of the bitmap must be .bmp
Step -3:
Compress the bitmap files. This will only work in a Linux console. Copy all bmp files into a separate folder. Also copy this program into this folder and give it executable permissions (chmod 755 bmp2cmp).
Then run the program (./bmp2cmp), it will convert all BMP files to CMP files.
Step -4:
Copy the CMP files to an SD card (normal size SD card, FAT32 formatted).
Step -5:
Insert the SD card into the SD slot in the display…. Turn on the DSP-7. The screen shows the copying
process of the graphic files into the flash. When done, remove the SD card!
Copyright notice:
Some of the original images are from http://www.iconarchive.com , https://www.kindpng.com and https://iconarchive.com
At the time of download (October 2022), these images are marked as “free for commercial use”. Licensed images are not used.
Images I have drawn myself are also free for other purposes.
